Εργαλεία Βουλκανισμού
Showing 1–21 of 33 results
-
ΑΝΑΛΩΣΙΜΑΣυρματόβουρτσες σετ 3 τεμαχίων 225 mm
Συρματόβουρτσες
Σετ 3 τεμαχίων
Μήκος: 225mm
Περιλαμβάνει:
1 βούρτσα ορείχαλκου
1 βούρτσα χάλυβα
1 βούρτσα πλαστική
Kraftmann Γερμανίας
(0 reviews) -
ΑΝΑΛΩΣΙΜΑΣυρματόβουρτσες σετ 3 τεμαχίων 175 mm
Συρματόβουρτσες
Σετ 3 τεμαχίων με
Μήκος: 175 mm
Το σετ περιλαμβάνει:
1 βούρτσα ορείχαλκου
1 βούρτσα χάλυβα
1 βούρτσα πλαστική
(0 reviews) -
ΑΝΑΛΩΣΙΜΑΣυρματόβουρτσα χειρός 260 mm
Συρματόβουρτσα χειρός
Mε σύρμα από ατσάλι
Λαβή από πολυπροπυλένιο
Μήκος: 260 mm
(0 reviews) -
ΑΝΑΛΩΣΙΜΑΣυρματόβουρτσα με πλαστική λαβή 282 mm
Συρματόβουρτσα
Με πλαστική λαβή 2-συστατικών
Μήκος: 282 mm
Σύρμα από ατσάλι
Με 4 σειρές από σύρμα
Διαστάσεις: 20 x 130 mm
(0 reviews) -
ΑΝΑΛΩΣΙΜΑΣυρματόβουρτσα με πλαστική λαβή 172 mm
Συρματόβουρτσα
Με πλαστική λαβή 2-συστατικών
Μήκος: 172 mm
Σύρμα από ατσάλι
Με 4 σειρές από σύρμα
Διαστάσεις: 25 x 160 mm
(0 reviews) -
ΑΝΑΛΩΣΙΜΑΣμυριδοτροχός για αεροθαλάμους Φ (mm) 45 GRIT 60
• Finishing tools allow to remove the vulcanized rubber excess.
• Speed: between 1400 and 4500 rpm.
• We advise you to wear protective goggles when using this material. *** 1 bague seule
Grit: Fine (60 or 170)
Ø (mm): 45
width. (mm): 30
Ø stem (mm): 6(0 reviews) -
ΑΝΑΛΩΣΙΜΑΣκαρπέλο 3/8” x 24 UNF
• Rotary gouges are intended to remove rubber pieces on truck and EM tyres.
• Speed: between 1400 and 4500 rpm.
• We advise you to wear protective goggles when using this equipment Ø (mm): 50
Tapping: 3/8” x 24 UNF(0 reviews) -
ΑΝΑΛΩΣΙΜΑΡάσπα τύπου στυλό Φ (mm) 6 GRIT 16 & 36
• Rasps are recommended for rubber buffing and skiving.
• Speed: between 1400 and 4500 rpm.
• We advise you to wear protective goggles when using this material. Intented use: For rubber
Grit: Very large 16 – 36
Ø (mm): 6
Lenght (mm): 65
Ø stem (mm): 6(0 reviews) -
ΑΝΑΛΩΣΙΜΑΡάσπα τύπου στυλό Φ (mm) 102 (GRIT 16 & 36)
• Rasps are recommended for rubber buffing and skiving.
• Speed: between 1400 and 4500 rpm.
• We advise you to wear protective goggles when using this material. Intented use: For rubber
Grit: Very large 16 – 36
Lenght (mm): 102
Ø stem (mm): 6(0 reviews) -
ΑΝΑΛΩΣΙΜΑΡάσπα σφαιρική Φ (mm) 30 GRIT GG
• Rasps are recommended for rubber buffing and skiving.
• Speed: between 1400 and 4500 rpm.
• We advise you to wear protective goggles when using this material. Intented use: For rubber
Grit: Large (24 or 330)
Ø (mm): 30
width. (mm): 6
Ø stem (mm): 6(0 reviews) -
ΑΝΑΛΩΣΙΜΑΡάσπα σφαιρική Φ (mm) 20
• Rasps are recommended for rubber buffing and skiving.
• Speed: between 1400 and 4500 rpm.
• We advise you to wear protective goggles when using this material. Intented use: For rubber
Grit: Medium 16 – 36
Ø (mm): 20
Ø stem (mm): 6(0 reviews) -
ΑΝΑΛΩΣΙΜΑΡάσπα 1/2″ Ημισφαιρική Φ 76 (mm) GRIT TGG
• Rasps are recommended for rubber buffing and skiving.
• Speed: between 1400 and 4500 rpm.
• We advise you to wear protective goggles when using this material.
** INTENSIVE USE’ MARKING =
Tungsten carbide rasps characterised by smooth teeth. These rasps consist of a metal sheet support electronically coated with a certain
number of steel balls (according to the particle size). These balls are in turn covered by a tungsten carbide “conical hat” using the same procedure. The smooth, even teeth provide more regular rasping and improved ventilation (reduced heating of the rubber and fewer
fumes released). Intented use: For rubber
Grit: Medium (36 or 230)
Ø (mm): 76
width. (mm): 32
Tapping: ø 14 ELG – FG – ELG(0 reviews) -
ΑΝΑΛΩΣΙΜΑ
Ράσπα 1/2″ Ημισφαιρική Φ 76 (mm) GRIT GM
• Rasps are recommended for rubber buffing and skiving.
• Speed: between 1400 and 4500 rpm.
• We advise you to wear protective goggles when using this material.
** INTENSIVE USE’ MARKING =
Tungsten carbide rasps characterised by smooth teeth. These rasps consist of a metal sheet support electronically coated with a certain
number of steel balls (according to the particle size). These balls are in turn covered by a tungsten carbide “conical hat” using the same procedure. The smooth, even teeth provide more regular rasping and improved ventilation (reduced heating of the rubber and fewer
fumes released). Intented use: For rubber
Grit: Medium (36 or 230)
Ø (mm): 76
width. (mm): 32
Tapping: ø 14 ELG – FG – ELG(0 reviews) -
ΑΝΑΛΩΣΙΜΑ
Ράσπα 1/2″ Ημισφαιρική Φ 76 (mm) GRIT GF
• Rasps are recommended for rubber buffing and skiving.
• Speed: between 1400 and 4500 rpm.
• We advise you to wear protective goggles when using this material.
** INTENSIVE USE’ MARKING =
Tungsten carbide rasps characterised by smooth teeth. These rasps consist of a metal sheet support electronically coated with a certain
number of steel balls (according to the particle size). These balls are in turn covered by a tungsten carbide “conical hat” using the same procedure. The smooth, even teeth provide more regular rasping and improved ventilation (reduced heating of the rubber and fewer
fumes released). Intented use: For rubber
Grit: Medium (36 or 230)
Ø (mm): 76
width. (mm): 32
Tapping: ø 14 ELG – FG – ELG(0 reviews) -
ΑΝΑΛΩΣΙΜΑΡάσπα 1/2″ Ημισφαιρική Φ 76 (mm)
• Rasps are recommended for rubber buffing and skiving.
• Speed: between 1400 and 4500 rpm.
• We advise you to wear protective goggles when using this material. Intented use: For rubber
Grit: 16 – 36 – 60
Ø (mm): 76
width. (mm): 32
Tapping: ø 14(0 reviews) -
ΑΝΑΛΩΣΙΜΑΡάσπα 1/2″ Ημισφαιρική Φ 50 (mm) GRIT TGG
Rasps are recommended for rubber buffing and skiving.
• Speed: between 1400 and 4500 rpm.
• We advise you to wear protective goggles when using this material.
** INTENSIVE USE’ MARKING =
Tungsten carbide rasps characterised by smooth teeth. These rasps consist of a metal sheet support electronically coated with a certain
number of steel balls (according to the particle size). These balls are in turn covered by a tungsten carbide “conical hat” using the same procedure. The smooth, even teeth provide more regular rasping and improved ventilation (reduced heating of the rubber and fewer
fumes released). Intented use: For rubber
Grit: 16 – 309
Ø (mm): 50
width. (mm): 25
Tapping: 3/8” x 24 UNF ELG – FG – MG(0 reviews) -
ΑΝΑΛΩΣΙΜΑ
Ράσπα 1/2″ Ημισφαιρική Φ 50 (mm) GRIT GM
Rasps are recommended for rubber buffing and skiving.
• Speed: between 1400 and 4500 rpm.
• We advise you to wear protective goggles when using this material.
** INTENSIVE USE’ MARKING =
Tungsten carbide rasps characterised by smooth teeth. These rasps consist of a metal sheet support electronically coated with a certain
number of steel balls (according to the particle size). These balls are in turn covered by a tungsten carbide “conical hat” using the same procedure. The smooth, even teeth provide more regular rasping and improved ventilation (reduced heating of the rubber and fewer
fumes released). Intented use: For rubber
Grit: 16 – 309
Ø (mm): 50
width. (mm): 25
Tapping: 3/8” x 24 UNF ELG – FG – MG(0 reviews) -
ΑΝΑΛΩΣΙΜΑ
Ράσπα 1/2″ Ημισφαιρική Φ 50 (mm) GRIT GF
• Rasps are recommended for rubber buffing and skiving.
• Speed: between 1400 and 4500 rpm.
• We advise you to wear protective goggles when using this material.
** INTENSIVE USE’ MARKING =
Tungsten carbide rasps characterised by smooth teeth. These rasps consist of a metal sheet support electronically coated with a certain
number of steel balls (according to the particle size). These balls are in turn covered by a tungsten carbide “conical hat” using the same procedure. The smooth, even teeth provide more regular rasping and improved ventilation (reduced heating of the rubber and fewer
fumes released). Intented use: For rubber
Grit: 16 – 309
Ø (mm): 50
width. (mm): 25
Tapping: 3/8” x 24 UNF ELG – FG – MG(0 reviews) -
ΑΝΑΛΩΣΙΜΑΡάσπα 1/2″ Ημισφαιρική Φ 50 (mm)
• Rasps are recommended for rubber buffing and skiving.
• Speed: between 1400 and 4500 rpm.
• We advise you to wear protective goggles when using this material. Intented use: For rubber
Grit: 16 – 36 – 60
Ø (mm): 50
width. (mm): 25
Tapping: 3/8” x 24 UNF(0 reviews) -
ΑΝΑΛΩΣΙΜΑΡάσπα 1/2″ Ημισφαιρική Φ 120 (mm) GRIT TGG
Intented use: For rubber
Grit: Medium (36 or 230)
Ø (mm): 102
width. (mm): 38
Tapping: ø 14(0 reviews) -
ΑΝΑΛΩΣΙΜΑ
Ράσπα 1/2″ Ημισφαιρική Φ 120 (mm) GRIT GM
Intented use: For rubber
Grit: Medium (36 or 230)
Ø (mm): 102
width. (mm): 38
Tapping: ø 14(0 reviews)